ITT Flygt與ABB合作研發出一系列VFD產品，這些產品獨有的Flygt軟件是專門為污水泵而設計的。一般的VFD必須經過人工手動設置大量的參數才可以適用于多種不同設備。然而當您應用ACS550.這種新版本時，就會省去了上面諸多的步驟。使用Flygt的VFD優點：
●提高系統可靠性，降低重電機及液壓系統的承載量；
●改善對于生產過程的控制，使流量和賽制匹配為系統的需求；
●在新建和改造優化標注設施時獲得更大的靈活性；
●按照系統需求來調節泵的速度以期更加節省能源。
ACS550提供了一個特別程序以減少堵塞的危險，幫助葉輪保持清潔。通過一個預先的設置，操作人員可以減少環境參數的設置高達90%以上。當ACS550檢測到一個超負荷值高于預設值時,它會引動順序清洗程序。這不僅能提高設備的可靠性，同時也意味著較少的緊急叫停。ACS550可以與其他的控制器例如Flygt的FMC配合應用，可以匹配不同的SCADA系統接口，包括Flygt的aquaview。
New Range of VFDs Tailored for Wastewater Pumps
In co-operation with ABB, ITT Flygt has developed a range of VFDs which, with their unique Flygt software, are specifically tailored for wastewater pumps.
A standard VFD can be used in many different applications. But before it can be taken into use a large number of parameters have to be set manually. However, this is not needed when using this new version of ACS550.
The advantages of using a Flygt VFD:
Boost system reliability – reduce stresses on electrical and hydraulic systems.
Improve process control – match flow and head to system requirements.
Gain greater flexibility – optimize dimensioning in new and retrofit installations.
Save energy – adjust pump speed to system demand.
To reduce the risk of clogging the ACS550 is supplied with a special program that has been developed to help keep impellers clean. A selection of pre-settings reduce the number of parameters needed to be handled by more than 90 percent. When the ACS550 senses an increase in load that exceeds a preset value, it triggers a cleaning sequence. Not only does this improve reliability, but it also means fewer emergency call-outs. The ACS550 can communicate with other pump controllers such as Flygt’s FMC and can interface with different SCADA systems, including Flygt’s AquaView.